DHR CommMgrPro [All Reso] V2.4 Multilanguage XScale WM5 WM6 Cracked-SyMPDA

DHR.CommMgrPro.QVGA.v2.4.Multilanguage.XScale.WM5. WM6.Cracked-SyMPDA
DHR.CommMgrPro.QVGA.v2.4.Multilanguage.XScale.WM5. WM6.Cracked-SyMPDA
DHR.CommMgrPro.VGA.v2.4.Multilanguage.XScale.WM5.W M6.Cracked-SyMPDA



Control your PDA Phone Edition with profiles automatically selected depending on your current location(Phone Cell / LAC) and current time. You can select manually profiles too if you want.

Take full control over:

* Connections.
o Enable and Disable connections.
o Stablish and close connections.

* Band.
o Switch between GPRS, UMTS and auto modes. You can set a time limit (in minutes) so the program will switch back automatically to GPRS when the period expires.

* WIFI.
o Turn on / Turn off Wifi.

* Bluetooth.
o Switch between modes (Off, Connectable and discoverable)

* Phone.
o Switch between Flight mode and On mode.

* Speaker.
o Turn on/off Bluetooth automatically on phone call
+ Switch between Normal, Mute and Vibrate modes.
o Manage all the functions and submenus using stylus, finger or jog-dial
o Let the program to close automatically iddle connections. The program will close any connection that hasnt data traffic in X seconds.
o The program includes a Today Plugin where you can check the current state of the device very quickly
o Tested in HTC s200, HTC Artemis, HTC TynT, HTC trinity, HTC Athena and Treo 750. Some ETEN devices doesnt provide Cell Id info.
o All the duties of BandSwitch are included

Based on your location (GSM Cell ID) you can:

* Create profiles (Home, work, ...) and assign cells to them.

* Create time frames for those profiles (day, night...).

* Execute actions automatically when you enter or exits any LAC, profile or profile-timeframe:
o Set the state of your connections, band, wifi, bluetooth, phone and speaker,...
o Play sounds, songs and open files(scripts, documents, etc)
o Activate or deactivate call forwarding
o Activate or deactivate "Allow Incomming beam" option
o Set CPU mode or turn on/off screen
o Send sms and emails.
o Enable or disable connections.
o Select today themes (tsk)
o Select screen light level (tsk)
o ...and much more.


The program will monitor your battery, data taffic, CPU usage and locations so it will offer statistics and statistics about battery drain, traffic....

Features:

- Use menus and submenus with the finger, jog-dial or stylus...

- Totally skinable. Create your skins with your images, colors, ...

- Activate any option with no time limit or during some minutes (1, 5, 10, 30, 60, 120) or up a date. In this way, for example, you can set bluetooth on, or UMTS, or wifi on only for the next X minutes avoiding battery draining

Manage your favourites places, assign lacs or cells to them and choose icons for them.

- Two locations modes:

1. LAC Mode: Each Location Area Code may be from 500 meters to 4 km, depending if you are in or out a city.
2. Cell ID Mode: Each Cell ID may be from 50 meters to 1 km, depending if you are in or out a city.

- Assign images to your places. Use the stock images or choose your own files.

- Schedule different periods to make the device behave in different ways for the same place depending on the current time.

- You can set "Close Idle connections" turned on and specify the frequency data traffic will be checked.

* When Comm Mgr Pro detects a new connections it waits 20 seconds.
* Then checks current data flow.
* Waits x seconds (user configured)
* If there isnt data traffic then close the connection. If there is traffic then waits again.
* Checks are scheduled using operative system time notifications so checks will be done althought the device is in idle or power off states

- Manage all your GPRS-UMTS-HSDPA-EDGE-EVDO connections in a very easy way. Simply tapping the cells you can:

1. Enable and Disable a connection. When a connection is disabled it cant be used by any application and It wont connect until It was enabled again.
2. Connect and Disconnect a connection. Click that column will connect or disconnect that connection.
3. Set a connection as "always on" or not. When a connections is set a "always on" Windows will try to keep that connection in "Connected" state always.
4. Select your default connection. This connection will be choosen when you want to stablish a connection in main panel.

Version V2.4(2008-10-31)
Fixed an issue on the battery statistics.
Fixed an issue related to lock/unlock profiles being phone off
Fixed issues with schedules based on "always on" profiles.
To avoid confussion CMP wont let you lock a profile if it hasnt a schedule that matches current time
The installer has been separated in two different installers. One for CMP and others for skin. In this way a CMP update will be much smaller.
To avoid problems with new incomming models with "strange" screen resolution CMP will be forced to use the resolution of the current theme.
The way to change the band now is selected manually because of the many carrier names for the different models
New skin available "white" for all resolutions and others are comming¡. If you know to draw icons and you want to create a skin and share it with us please contact me.
To update: First install the CMP's cab. Then install a theme's cab according to your screen resolution. Then run CMP.